GmTruckHQ is the resource on GM Trucks, Suspension, engine information, Body Modifications, painting tutorials.  Modifications to suit every need, budget and whim
Home   Forum   Chat   Register   Today's Posts   Search  

GMTruckHQ is the premier GM Truck Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

Go Back   GmTruckHQ > Tech Discussions > How-To

98+ door panel removal s-series

Thread Tools Display Modes
Old 03-28-2009, 03:59 AM   #1
orangesonoma's Avatar
Send PM    Add to friends
Join Date: Apr 2008
  orangesonoma is offline    
Senior Member

well if you need to remove your front door panel on your 98+ s10 or blazer
these are the steps you need to take...
first locate and remove the two 7mm bolts under the arm rest

next remove the one phillip head screw on the door handle trim

next step is to remove the trim from the door grab it by the front of it and unclip it

now do not remove this from the door panel...there is no need to remove it

if your truck has power windows lift up the front and unclip the switch panel

next unclip the plugs...if you have a hard time with these clips...just slide the switch panel thru the hole in the door...

now pull the door panel towards you...if you cant get your fingers behind the panel...use a panel popper and release the white clips on the panel

and that is how you remove the door can use this if you need to remove the panel to change the speakers...

if you have manual windows you will need to remove the clip behind the crank...i use a hook pick to remove the clip...just use caution that the clip does not fly out...or you can lose it...once i get pics of that i will post it up...

any me

Reply With Quote


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Vin Decoder Info