GmTruckHQ is the resource on GM Trucks, Suspension, engine information, Body Modifications, painting tutorials.  Modifications to suit every need, budget and whim
Home   Forum   Chat   Register   Today's Posts   Search  

GMTruckHQ is the premier GM Truck Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

Go Back   GmTruckHQ > Tech Discussions > How-To

fix fast flash in a 98+ S-Series


Reply
 
Thread Tools Display Modes
Old 03-29-2009, 04:48 PM   #1
orangesonoma's Avatar
Send PM    Add to friends
Join Date: Apr 2008
 
  orangesonoma is offline    
orangesonoma
Senior Member

now i am not going to lie.. i did not come up with the flasher/relay mod.. Zeeke98 did and showed me...i wish i did..but here we go...

but here are the pics i just took of me doing it..
here is the unit

use a small screw driver to pry open the case..there are spots on both sides to pry

once you get it open it will look like this

i am pointing to the leg on the ic chip that has to be removed

with the edge of the razor put the end under the leg of the resistor...and apply light pressure to pop the leg up...you can also use a fine tip solder iron to heat up the solder and then pry it up...but i did this with a razor


snap the cover back on and you are good to go...


on 98+ s-series this is located behind the glove box door on the passenger side...it has a small green strap holding it in..push that aside and pull the unit out.

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


 


Vin Decoder Info