GmTruckHQ is the resource on GM Trucks, Suspension, engine information, Body Modifications, painting tutorials.  Modifications to suit every need, budget and whim
Home   Forum   Chat   Register   Today's Posts   Search  

GMTruckHQ is the premier GM Truck Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

Go Back   GmTruckHQ > Specific Model Forums > CrossOvers & Vans

Programming Keyless fob/remote


Reply
 
Thread Tools Display Modes
Old 06-22-2008, 05:53 PM   #1
The Master's Avatar
Send PM    Add to friends    Homepage
Join Date: Jun 2006
 
  The Master is offline    
The Master
ΜΟΛΩΝ ΛΑΒΕ

This may or may not work on some older models. I have seen this work on the 98 - 01. If you have any other ways please post them in this thread.

Lets get started.

Important! Once the BCM enters program mode, all transmitters must be programmed at the same time. Any transmitters not learned at this time will be erased.

1) Remove the key from the ignition cylinder

2) Remove the BCM PRGRM fuse from the fuse panel

3) Close all the doors

4) Close the liftgate

5) Turn the ignition lock cylinder to the ACC. position

6) Turn the ignition lock cylinder to OFF, and then back to ACC within 1 second

7) Open and close any door
A chim will be heard when the system enters the BCM programming mode

IMPORTANT!
After 7 seconds a chime may be heard confirming successful synchronization. It is necessary to wait approximately 14 seconds for a second chime that will confirm successful programming.

8) Press and hold the transmitter LOCK and UNLOCK buttons simultaneously for 14 seconds

9) Repeat the previous step on each additional transmitter to be programmed.

10) Remove the ignition key from the ignition cylinder

11) Install the BCM PRGRM fuse back into the fuse panel.

Cheers

Reply With Quote
Reply

Bookmarks

Tags
keyfob, oldsmobile silhouette, pontiac montana, remote, reprogram keyob, reprogram remote, silhouette, venture


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


 


Vin Decoder Info