GmTruckHQ is the resource on GM Trucks, Suspension, engine information, Body Modifications, painting tutorials.  Modifications to suit every need, budget and whim
Home   Forum   Chat   Register   Today's Posts   Search  

GMTruckHQ is the premier GM Truck Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

Go Back   GmTruckHQ > Tech Discussions > How-To

Keyless Entry Programming


Reply
 
Thread Tools Display Modes
Old 04-18-2007, 02:56 AM   #1
The Master's Avatar
Send PM    Add to friends    Homepage
Join Date: Jun 2006
 
  The Master is offline    
The Master
ΜΟΛΩΝ ΛΑΒΕ

Document ID #264477
1997, 1998, 1999 Chevrolet/Geo Tahoe, Yukon, Suburban - 4WD

Transmitter Programming Base

If the key is in the ON position during programming procedure, the horn chirp will be disabled, if the key is in the OFF position, the horn chirp will be enabled. The horn will chirp when the lock button is pressed two times.

When programming the remote control door lock reciever, All transmitters must be programmed at this time in order for the transmitters to operate the vehicle.

1. Ground pin 4 to pin 8 of the data link connector (DLC). The reciever will respond by locking and unlocking the doors, and activating the liftfgate window release (if equipped) within 2 seconds.
2. Press and hold the LOCK and UNLOCK buttons simultaneously on the first transmitter to be programmed until the locks cycle (approximately 10 seconds).
3. Repeat step 2 for up to four total transmitters to be programmed (if available). The reciever will respond by locking and unlocking the doors and activating the liftgate window release (if equipped) within 2 seconds.
4. Remove the ground applied to the DLC.
5. Lock and unlock the doors in order to verify the transmitter operation.
6. Activate the rear window release in order to verify the transmitter operation.

This will work on 2wd and 4wd both.

Reply With Quote
Reply

Bookmarks

Tags
1997, 1998, 1999, chevrolet, geo, keyless entry, suburban, tahoe, transmitter programming, yukon


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


 


Vin Decoder Info